Información adicional

Producción científica

Diez-Pastor, J.F., Gil Del Val, A., Veiga, F., Bustillo, A.

25640702200;55760954300;25628788300;55956130100;

High-accuracy classification of thread quality in tapping processes with ensembles of classifiers for imbalanced learning

(2021) Measurement: Journal of the International Measurement Confederation, 168, art. no. 108328, .

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85089531474&doi=10.1016%2fj.measurement.2020.108328&partnerID=40&md5=685188692329c1d5b8e19089da1c3a8f

 

DOI: 10.1016/j.measurement.2020.108328

 

 

 

 

Aldalur, E., Veiga, F., Suárez, A., Bilbao, J., Lamikiz, A.

57216152930;25628788300;36705355900;57217595761;57195913220;

High deposition wire arc additive manufacturing of mild steel: Strategies and heat input effect on microstructure and mechanical properties

(2020) Journal of Manufacturing Processes, 58, pp. 615-626.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85090028399&doi=10.1016%2fj.jmapro.2020.08.060&partnerID=40&md5=e7d49909b7b08330eea4ded78b8b27e9

 

DOI: 10.1016/j.jmapro.2020.08.060

 

 

 

 

Casuso, M., Polvorosa, R., Veiga, F., Suárez, A., Lamikiz, A.

57217294587;56610202100;25628788300;36705355900;57195913220;

Residual stress and distortion modeling on aeronautical aluminum alloy parts for machining sequence optimization

(2020) International Journal of Advanced Manufacturing Technology, 110 (5-6), pp. 1219-1232.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85089745811&doi=10.1007%2fs00170-020-05816-7&partnerID=40&md5=aa2cd2692af3f8ffa50e2016a54e212b

 

DOI: 10.1007/s00170-020-05816-7

 

 

 

 

Bhujangrao, T., Veiga, F., Suárez, A., Iriondo, E., Mata, F.G.

57207860687;25628788300;36705355900;36711805400;57214690244;

High-temperature mechanical properties of IN718 alloy: Comparison of additive manufactured and wrought samples

(2020) Crystals, 10 (8), art. no. 689, pp. 1-13.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85090684755&doi=10.3390%2fcryst10080689&partnerID=40&md5=e4057c60ac6834a9ee28ead559dfba9a

 

DOI: 10.3390/cryst10080689

 

 

ACCESS TYPE: Open Access

 

 

Aldalur, E., Veiga, F., Suárez, A., Bilbao, J., Lamikiz, A.

57216152930;25628788300;36705355900;57217595761;57195913220;

Analysis of the wall geometry with different strategies for high deposition wire arc additive manufacturing of mild steel

(2020) Metals, 10 (7), art. no. 892, pp. 1-19. Cited 2 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85087396528&doi=10.3390%2fmet10070892&partnerID=40&md5=9c7b35f1f3490eb79722057386a84756

 

DOI: 10.3390/met10070892

 

 

ACCESS TYPE: Open Access

 

 

Bhujangrao, T., Froustey, C., Iriondo, E., Veiga, F., Darnis, P., Mata, F.G.

57207860687;6603005362;36711805400;25628788300;13805232100;57214690244;

Review of intermediate strain rate testing devices

(2020) Metals, 10 (7), art. no. 894, pp. 1-24.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85088687064&doi=10.3390%2fmet10070894&partnerID=40&md5=d54a5b679708cfdb5b9d7db59673df41

 

DOI: 10.3390/met10070894

DOCUMENT TYPE: Review

 

ACCESS TYPE: Open Access

 

 

Artaza, T., Bhujangrao, T., Suárez, A., Veiga, F., Lamikiz, A.

55988486000;57207860687;36705355900;25628788300;57195913220;

Influence of heat input on the formation of laves phases and hot cracking in plasma arc welding (PAW) additive manufacturing of inconel 718

(2020) Metals, 10 (6), art. no. 771, pp. 1-17. Cited 1 time.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85086112884&doi=10.3390%2fmet10060771&partnerID=40&md5=cd7ce6ac1dc8d3d9403eb6f863813966

 

DOI: 10.3390/met10060771

 

 

ACCESS TYPE: Open Access

 

 

Del Val, A.G., Veiga, F., Pereira, O., De Lacalle, L.N.L.

55760954300;25628788300;55988095300;6602745725;

Threading performance of different coatings for high speed steel tapping

(2020) Coatings, 10 (5), art. no. 464, .

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85085645578&doi=10.3390%2fCOATINGS10050464&partnerID=40&md5=2dc8cac72642c0f3c3be3dd751512f1f

 

DOI: 10.3390/COATINGS10050464

 

 

ACCESS TYPE: Open Access

 

 

Ortego, P., Diez-Olivan, A., Del Ser, J., Veiga, F., Penalva, M., Sierra, B.

57214725318;57211284623;9737598300;25628788300;56376957300;6604043456;

Evolutionary LSTM-FCN networks for pattern classification in industrial processes

(2020) Swarm and Evolutionary Computation, 54, art. no. 100650, . Cited 1 time.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85078973550&doi=10.1016%2fj.swevo.2020.100650&partnerID=40&md5=8946c8f98d879da572a3c3a430237601

 

DOI: 10.1016/j.swevo.2020.100650

 

 

 

 

Gil Del Val, A., Veiga, F., Suárez, A., Arizmendi, M.

55760954300;25628788300;36705355900;25627074800;

Thread quality control in high-speed tapping cycles

(2020) Journal of Manufacturing and Materials Processing, 4 (1), art. no. 4010009, . Cited 2 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083516322&doi=10.3390%2fjmmp4010009&partnerID=40&md5=3bd75fa2d269e395b6390971d1bc1522

 

DOI: 10.3390/jmmp4010009

 

 

ACCESS TYPE: Open Access

 

 

Veiga, F., Del Val, A.G., Suárez, A., Alonso, U.

25628788300;55760954300;36705355900;55928894400;

Analysis of the machining process of titanium Ti6Al-4V parts manufactured by wire arc additive manufacturing (WAAM)

(2020) Materials, 13 (3), art. no. 766, . Cited 3 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85079588062&doi=10.3390%2fma13030766&partnerID=40&md5=55db18eff9170d8690654f2bc5d37aac

 

DOI: 10.3390/ma13030766

 

 

ACCESS TYPE: Open Access

 

 

Iriondo-Plaza, E., Veiga-Suárez, F., Eslava-Adot, U., Gil-Del-Val, A.

57216488898;25628788300;57216483958;55760954300;

Validation of the Use of Concept Maps as a Tool for the Teaching and Learning of Industrial Drawing

(2020) Lecture Notes in Mechanical Engineering, pp. 438-445.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85083678997&doi=10.1007%2f978-3-030-41200-5_48&partnerID=40&md5=290c973f8365d241180c53736f7fd7ea

 

DOI: 10.1007/978-3-030-41200-5_48

DOCUMENT TYPE: Conference Paper

 

 

 

Alonso, U., Veiga, F., Suárez, A., Artaza, T.

55928894400;25628788300;36705355900;55988486000;

Experimental investigation of the influence of wire arc additive manufacturing on the machinability of titanium parts

(2020) Metals, 10 (1), art. no. 24, . Cited 5 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85077377907&doi=10.3390%2fmet10010024&partnerID=40&md5=cd42c83e559c9ca39319b22118de84ba

 

DOI: 10.3390/met10010024

 

 

ACCESS TYPE: Open Access

 

 

Suárez, A., Veiga, F., Polvorosa, R., Artaza, T., Holmberg, J., de Lacalle, L.N.L., Wretland, A.

36705355900;25628788300;56610202100;55988486000;57189051813;6602745725;35752624900;

Surface integrity and fatigue of non-conventional machined Alloy 718

(2019) Journal of Manufacturing Processes, 48, pp. 44-50. Cited 9 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85074301762&doi=10.1016%2fj.jmapro.2019.09.041&partnerID=40&md5=b669fa3880f22baf66c34690fe1400df

 

DOI: 10.1016/j.jmapro.2019.09.041

 

 

 

 

Ostra, T., Alonso, U., Veiga, F., Ortiz, M., Ramiro, P., Alberdi, A.

57188763813;55928894400;25628788300;57204823150;57202764410;35799587800;

Analysis of the machining process of inconel 718 parts manufactured by laser metal deposition

(2019) Materials, 12 (13), art. no. 2159, . Cited 3 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85068860683&doi=10.3390%2fma12132159&partnerID=40&md5=b2592b68267fc4cc17649c2ef9289323

 

DOI: 10.3390/ma12132159

 

 

ACCESS TYPE: Open Access

 

 

Girot-Mata, F.-A., Jansson, J., Veiga, F., Echevarria, A.

6602158058;57210389858;25628788300;57210342082;

Enable (European Network for Alloys Behavior Law Enhancement). Simulation of the future for manufacturing processes [ENABLE (European Network for Alloys Behavior Law Enhancement). Simulación del Futuro para Procesos de Fabricación]

(2019) Dyna (Spain), 94 (2), p. 120.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85070368287&doi=10.6036%2f9105&partnerID=40&md5=9788bcd51d1d26f974856cb6c2697586

 

DOI: 10.6036/9105

DOCUMENT TYPE: Note

 

 

 

Suárez, A., Veiga, F., de Lacalle, L.N.L., Polvorosa, R., Wretland, A.

36705355900;25628788300;6602745725;56610202100;35752624900;

An investigation of cutting forces and tool wear in turning of Haynes 282

(2019) Journal of Manufacturing Processes, 37, pp. 529-540. Cited 11 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85058977425&doi=10.1016%2fj.jmapro.2018.12.025&partnerID=40&md5=451a79ee8c2560c672485b354dd4ca5b

 

DOI: 10.1016/j.jmapro.2018.12.025

 

 

 

 

Camacho, J., Veiga, F., Penalva, M.L., Diez-Olivan, A., Deitert, L., de Lacalle, N.L.

56835187600;25628788300;56376957300;57193453930;55692881600;57207315231;

On-line monitoring of blind fastener installation process

(2019) Materials, 12 (7), art. no. 1157, .

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85065641190&doi=10.3390%2fma12071157&partnerID=40&md5=fe4c7c977d14677425cba0d3a9ae99ab

 

DOI: 10.3390/ma12071157

 

 

ACCESS TYPE: Open Access

 

 

Urbikain, G., Alvarez, A., de Lacalle, L.N.L., Arsuaga, M., Alonso, M.A., Veiga, F.

35868293600;57188769285;6602745725;55198909900;57196316527;25628788300;

A reliable turning process by the early use of a deep simulation model at several manufacturing stages

(2017) Machines, 5 (2), art. no. 15, . Cited 9 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85034237051&doi=10.3390%2fmachines5020015&partnerID=40&md5=8c83f1f4abb363904a018640ed9a1116

 

DOI: 10.3390/machines5020015

 

 

ACCESS TYPE: Open Access

 

 

Suárez, A., López de Lacalle, L.N., Polvorosa, R., Veiga, F., Wretland, A.

36705355900;6602745725;56610202100;25628788300;35752624900;

Effects of high-pressure cooling on the wear patterns on turning inserts used on alloy IN718

(2017) Materials and Manufacturing Processes, 32 (6), pp. 678-686. Cited 30 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85003855244&doi=10.1080%2f10426914.2016.1244838&partnerID=40&md5=9ffbd28fbc0735581ab1ee1dd97951af

 

DOI: 10.1080/10426914.2016.1244838

 

 

 

 

Polvorosa, R., Suárez, A., de Lacalle, L.N.L., Cerrillo, I., Wretland, A., Veiga, F.

56610202100;36705355900;6602745725;57193195312;35752624900;25628788300;

Tool wear on nickel alloys with different coolant pressures: Comparison of Alloy 718 and Waspaloy

(2017) Journal of Manufacturing Processes, 26, pp. 44-56. Cited 61 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85011588628&doi=10.1016%2fj.jmapro.2017.01.012&partnerID=40&md5=368378b066b522f4a04ae5ff23d2ad5f

 

DOI: 10.1016/j.jmapro.2017.01.012

 

 

 

 

Diez-Olivan, A., Penalva, M., Veiga, F., Deitert, L., Sanz, R., Sierra, B.

57193453930;56376957300;25628788300;55692881600;57194024332;6604043456;

Kernel density-based pattern classification in blind fasteners installation

(2017) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 10334 LNCS, pp. 195-206. Cited 3 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-85021742669&doi=10.1007%2f978-3-319-59650-1_17&partnerID=40&md5=6559fb823c9e27bb11e86ead54b9897e

 

DOI: 10.1007/978-3-319-59650-1_17

DOCUMENT TYPE: Conference Paper

 

 

 

Suárez, A., Veiga, F., de Lacalle, L.N.L., Polvorosa, R., Lutze, S., Wretland, A.

36705355900;25628788300;6602745725;56610202100;7801635013;35752624900;

Effects of Ultrasonics-Assisted Face Milling on Surface Integrity and Fatigue Life of Ni-Alloy 718

(2016) Journal of Materials Engineering and Performance, 25 (11), pp. 5076-5086. Cited 31 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84988734829&doi=10.1007%2fs11665-016-2343-6&partnerID=40&md5=8bab3435c09e370543632c0e2ece7903

 

DOI: 10.1007/s11665-016-2343-6

 

 

 

 

Camacho, J., Rivero, A., Veiga, F., Guzmán, D.

56835187600;56219529200;25628788300;56835286300;

A non-destructive quality assessment for blind-fastener installations based on the combination of ultrasound techniques and real-time monitoring of the fastening process

(2016) International Journal of Advanced Manufacturing Technology, 84 (5-8), pp. 1057-1066. Cited 1 time.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84941369864&doi=10.1007%2fs00170-015-7795-6&partnerID=40&md5=b1d19e5bb695678b4bf56235a50c0556

 

DOI: 10.1007/s00170-015-7795-6

 

 

 

 

Olaiz, E., Zulaika, J., Veiga, F., Puerto, M., Gorrotxategi, A.

24484178700;37462309400;25628788300;56355024200;57215958958;

Adaptive fixturing system for the smart and flexible positioning of large volume workpieces in the wind-power sector

(2014) Procedia CIRP, 21, pp. 183-188. Cited 5 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84915764416&doi=10.1016%2fj.procir.2014.03.193&partnerID=40&md5=da72c2a1d25a9e67f21e97314d2ad1cb

 

DOI: 10.1016/j.procir.2014.03.193

DOCUMENT TYPE: Conference Paper

 

ACCESS TYPE: Open Access

 

 

Gil Del Val, A., Fernández, J., Diéguez, P.M., Arizmendi, M., Veiga, F.

55760954300;55315212100;6507182659;25627074800;25628788300;

Real time diagnosis charts of thread quality in tapping operations

(2014) Materials Science Forum, 797, pp. 71-77.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84904307886&doi=10.4028%2fwww.scientific.net%2fMSF.797.71&partnerID=40&md5=c6a0efa7a6b151e66e8575bd9b859c2a

 

DOI: 10.4028/www.scientific.net/MSF.797.71

DOCUMENT TYPE: Conference Paper

 

 

 

Gil Del Val, A., Fernández, J., Del Castillo, E., Arizmendi, M., Veiga, F.

55760954300;55315212100;55584684300;25627074800;25628788300;

Monitoring of thread quality when tapping nodular cast iron with TiN-coated HSS cutting taps

(2013) International Journal of Advanced Manufacturing Technology, 69 (5-8), pp. 1273-1282. Cited 8 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84887619205&doi=10.1007%2fs00170-013-5078-7&partnerID=40&md5=2d2de1bfd8a28f447448918fa3a92614

 

DOI: 10.1007/s00170-013-5078-7

 

 

 

 

Gil Del Val, A., Fernández, J., Arizmendi, M., Veiga, F., Urízar, J.L., Berriozábal, A., Axpe, A., Diéguez, P.M.

55760954300;55315212100;25627074800;25628788300;55987087800;55988441700;55988512200;6507182659;

On line diagnosis strategy of thread quality in tapping

(2013) Procedia Engineering, 63, pp. 208-217. Cited 6 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84891704407&doi=10.1016%2fj.proeng.2013.08.196&partnerID=40&md5=c0f40eee278f31a1b8b9b9ac8d6d3e0a

 

DOI: 10.1016/j.proeng.2013.08.196

DOCUMENT TYPE: Conference Paper

 

ACCESS TYPE: Open Access

 

 

Aristizabal, M., Ardila, L.C., Veiga, F., Arizmendi, M., Fernandez, J., Sánchez, J.M.

57192267726;56523147100;25628788300;25627074800;25928236700;35402866400;

Comparison of the friction and wear behaviour of WC-Ni-Co-Cr and WC-Co hardmetals in contact with steel at high temperatures

(2012) Wear, 280-281, pp. 15-21. Cited 25 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-84857633476&doi=10.1016%2fj.wear.2012.01.015&partnerID=40&md5=d8710514d7ac163c89a339eae46d3b47

 

DOI: 10.1016/j.wear.2012.01.015

 

 

 

 

Arizmendi, M., Fernndez, J., Gil, A., Veiga, F.

25627074800;36909769200;55760954300;25628788300;

Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

(2010) International Journal of Machine Tools and Manufacture, 50 (12), pp. 1097-1114. Cited 12 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-77957934500&doi=10.1016%2fj.ijmachtools.2010.07.006&partnerID=40&md5=2c452a68b6c9919ccf6d42583e0256ac

 

DOI: 10.1016/j.ijmachtools.2010.07.006

 

 

 

 

Arizmendi, M., Fernández, J., Gil, A., Veiga, F.

25627074800;55315212100;55760954300;25628788300;

Model for the prediction of heterogeneity bands in the topography of surfaces machined by peripheral milling considering tool runout

(2010) International Journal of Machine Tools and Manufacture, 50 (1), pp. 51-64. Cited 19 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-70449530416&doi=10.1016%2fj.ijmachtools.2009.09.007&partnerID=40&md5=224f45883904c0e518fa80ebed49cbe2

 

DOI: 10.1016/j.ijmachtools.2009.09.007

 

 

 

 

Veiga, F., Fernández, J., Viles, E., Arizmendi, M., Gil, A., Penalva, M.L.

25628788300;55315212100;24462641900;25627074800;55760954300;56376957300;

Fault identification, diagnosis and compensation of flatness errors in hard turning of tool steels

(2009) Safety, Reliability and Risk Analysis: Theory, Methods and Applications - Proceedings of the Joint ESREL and SRA-Europe Conference, 1, pp. 205-210.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-79952321717&partnerID=40&md5=bd130a6fd6572163f8c4e78931581cb4

 

DOCUMENT TYPE: Conference Paper

 

 

 

Arizmendi, M., Campa, F.J., Fernández, J., López de Lacalle, L.N., Gil, A., Bilbao, E., Veiga, F., Lamikiz, A.

25627074800;9242535000;55315212100;6602745725;55760954300;57132645100;25628788300;57195913220;

Model for surface topography prediction in peripheral milling considering tool vibration

(2009) CIRP Annals - Manufacturing Technology, 58 (1), pp. 93-96. Cited 75 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-67349183676&doi=10.1016%2fj.cirp.2009.03.084&partnerID=40&md5=46add92bd188a48b61c9d4ddfa34e37f

 

DOI: 10.1016/j.cirp.2009.03.084

 

 

 

 

Arizmendi, M., Fernández, J., Gil, A., Veiga, F.

25627074800;55315212100;55760954300;25628788300;

Effect of tool setting error on the topography of surfaces machined by peripheral milling

(2009) International Journal of Machine Tools and Manufacture, 49 (1), pp. 36-52. Cited 35 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-55549143285&doi=10.1016%2fj.ijmachtools.2008.08.004&partnerID=40&md5=87112d64a8480d5e99e6301e407cb92f

 

DOI: 10.1016/j.ijmachtools.2008.08.004

 

 

 

 

Arizmendi, M., Fernández, J., Lacalle, L.N.L.d., Lamikiz, A., Gil, A., Sánchez, J.A., Campa, F.J., Veiga, F.

25627074800;55315212100;25627754700;57195913220;55760954300;56937518100;9242535000;25628788300;

Model development for the prediction of surface topography generated by ball-end mills taking into account the tool parallel axis offset. Experimental validation

(2008) CIRP Annals - Manufacturing Technology, 57 (1), pp. 101-104. Cited 56 times.

https://www.scopus.com/inward/record.uri?eid=2-s2.0-43649101706&doi=10.1016%2fj.cirp.2008.03.045&partnerID=40&md5=2758fd999c801900e29842af3f899544

 

DOI: 10.1016/j.cirp.2008.03.045

Puede obtener más información en el Portal de producción científica